Skip to main content

Brands we service · Factory authorized

Lindberg/MPH service, repair, and calibration

Lindberg/MPH is TPS's furnace brand, covering large industrial heat-treating and non-ferrous melting equipment as well as a light-industrial and laboratory range of box, tube and crucible furnaces. The lab range is marketed on the brand's own site under the Lindberg/Blue M name, which is also used by Thermo Fisher Scientific for its Thermo Scientific laboratory furnaces, so the two lines are easy to confuse. Lindberg/MPH manufactures in Riverside, Michigan, separate from the Pennsylvania chamber and oven plant.

Lindberg/MPH unit failing right now? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.

Lindberg/MPH logo
Factory authorized
Headquarters
Riverside, Michigan, USA
Active manufacturer
Lindberg traces to 1912 and MPH to 1971; both were combined under General Signal in the late 1970s, passed to SPX in 1998, and have been a TPS brand based in Riverside, Michigan since 2003. Thermo Fisher Scientific separately sells Thermo Scientific Lindberg/Blue M laboratory furnaces.
Lindberg/MPH official site (opens in a new tab)

Our relationship

Why Lindberg/MPH owners call us

Scientific Refrigeration is a factory-authorized service center for Lindberg/MPH. We service Lindberg/MPH equipment across Southern California and back that work with our own ISO 9001:2015 quality system.

Service on laboratory-scale Lindberg/MPH furnaces typically covers element and refractory replacement, thermocouple and controller calibration or retrofit, and atmosphere-system checks; large industrial heat-treat and melting systems are usually handled by the factory or specialist furnace contractors.

Equipment

Lindberg/MPH equipment we service

Heat-treat box and pit furnacesIntegral quench furnacesContinuous and conveyor furnacesAluminum melting and holding furnacesCrucible and pot furnacesLaboratory and light-industrial box, tube and crucible furnacesAtmosphere retorts

Product lines you’ll see in the field

  • Lindberg/MPH Box Furnaces (Cyclone, Rod Overbend, Car Bottom)
  • Pit Furnaces (Carburizing, Tempering, Nitriding)
  • Integral Quench Furnace Systems
  • Roller, Shaker and Rotary Hearth Furnaces
  • Aluminum Reverberatory and Stack Melters
  • Dry Hearth Melting Furnaces
  • Lindberg/Blue M Tube Furnaces (incl. Mini-Mite)
  • Lindberg/Blue M Crucible Furnaces
  • Lindberg/Blue M Retorts
  • 1100 °C to 1700 °C Lab Box Furnaces

Product names belong to Lindberg/MPH and are listed to help you identify your unit. If your model isn’t named here, ask. Model families change, and we service the ones in between.

What we see

Common service needs on Lindberg/MPH equipment

The calls we get most for this class of equipment, and what a good service visit looks like for each.

  • Heating-element burnout

    Resistance elements in box and tube furnaces age with every cycle, and open elements or degraded silicon-carbide rods produce slow heating and uneven zones.

  • Refractory and insulation damage

    Cracked hearth plates, spalled ceramic fiber and worn door insulation lower efficiency and can expose element terminals.

  • Thermocouple and controller drift

    Type K and Type S thermocouples degrade at temperature, and out-of-tolerance readings or controller failures are often mistaken for heater problems.

  • Atmosphere and retort sealing

    Units running inert or reducing atmospheres depend on retort seals, flow controls and purge procedures that need periodic inspection to protect samples and operators.

Related brands

Part of the Thermal Product Solutions (TPS) family

Also from one team

  • Service & Repair

    Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.

  • Preventative Maintenance

    Scheduled upkeep on a cadence that fits each unit, so wear is found on a visit instead of as downtime.

  • Calibration & Validation

    NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.

  • Emergency 24/7

    Real around-the-clock response for the failures that can’t wait until morning.

  • Equipment Rental

    New and used rental units, including 24-hour emergency availability when a unit goes down.

  • Installation

    Professional setup, startup, and relocation, documented and ready for validation.

Questions, answered

Lindberg/MPH service questions

Who makes Lindberg/Blue M furnaces today?

Two companies use the name: Thermo Fisher Scientific sells Thermo Scientific Lindberg/Blue M laboratory furnaces such as the Moldatherm box furnaces, while TPS's Lindberg/MPH markets its own light-industrial and lab tube, crucible and retort furnaces under Lindberg/Blue M branding. The manufacturer on the data plate determines the correct service and parts channel.

Does Lindberg/MPH only build large industrial furnaces?

No; alongside heat-treat and melting systems it offers a light-industrial and laboratory line of box furnaces up to 1700 °C, tube furnaces, crucible furnaces and retorts.

Where do you service Lindberg/MPH equipment?

Across all ten Southern California counties we cover: from our Huntington Beach headquarters in Orange County through Los Angeles, San Diego, Riverside, San Bernardino, Ventura, Santa Barbara, San Luis Obispo, Kern, and Imperial counties. Emergency response is available 24/7 for equipment that is down.

Ready when you are

Have Lindberg/MPH equipment that needs attention?

Request service online in under a minute, or call. Our line is answered 24/7, and dispatch confirms every request by phone.

24/7 emergency service · Dispatch confirms every request by phone.

Call nowRequest service

Request service

A few quick questions, then a dispatcher calls you to confirm.

What do you need?

Service type

Equipment failing right now? Don’t wait for a callback. 24/7 emergency service, and the line is answered 24/7.