Service & Repair
Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.
Ovens, sterilizers & furnaces · Repair & service
Temperature control does not stop at cold. Drying and vacuum ovens, depyrogenation and sterilizing ovens, burn-in and curing ovens, and laboratory furnaces run the same discipline in the other direction: a uniform space, a controller that tells the truth, and documentation to prove it. As a factory-authorized service center for the Thermal Product Solutions brands, we service them.
Oven or furnace not holding temperature? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.
Gravity and mechanical convection ovens, vacuum ovens, and cleanroom ovens.
Dry-heat sterilizers and depyrogenation ovens with HEPA filtration and validated cycles.
Batch, cabinet, walk-in, and conveyor ovens used for curing, drying, and burn-in.
Box, tube, and crucible furnaces for ashing, sintering, and materials work.
Heating elements age and the ramp slows. Blower motors and bearings wear and uniformity falls apart, which shows up as a failed survey rather than an alarm. Thermocouples drift; over-temperature limits stick; door seals let heat out and hold profiles slip. On sterilizers, HEPA filters load and airflow drops. Each of these is a routine repair when caught in a maintenance visit.
Elements, blower motors, thermocouples, and over-temperature limits are checked in that order, because a slow ramp, a failed survey, and a stuck limit each have a different cause.
Heating elements, blower motors and bearings, thermocouples, over-temperature limits, door seals, HEPA filters on sterilizers, and controller retrofits.
Ramp and hold verified, uniformity spot-checked, and the controller calibrated against traceable thermocouples, with a full survey scheduled where qualification requires it.
A written record of what failed and what was done, and a plain repair-or-replace recommendation when a unit is past its useful life.
Oven and furnace repairs are scheduled work for most sites; a sterilizing oven that stops a compounding program is prioritized. We do not rent ovens.
Ovens and furnaces are qualified by temperature uniformity surveys and, for sterilizing cycles, by validation of the cycle itself. We perform surveys with traceable thermocouples, document them, and handle controller calibration and retrofits when an older control system is no longer supported.
Brands
Linked brands have their own page. Not on the list? Ask. We service most makes and models.
Where
Ten Southern California counties from our Huntington Beach headquarters, and beyond by arrangement.
Los Angeles, Orange, Riverside, San Bernardino, San Diego, and Ventura counties are our core area. Santa Barbara, San Luis Obispo, Kern, and Imperial counties are on a regular route. Equipment that is already down jumps the queue, and our line is answered 24/7.
Outside Southern California we work by arrangement for contract and long-standing customers, and we say plainly what we can do and how soon.
Also from one team
Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.
NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.
Scheduled upkeep on a cadence that fits each unit, so wear is found on a visit instead of as downtime.
Ovens, sterilizers & furnaces FAQs
Yes. Multi-point surveys with NIST-traceable thermocouples, documented for your quality system, plus controller calibration and over-temperature limit checks.
Usually. Modern controllers retrofit onto most ovens and furnaces and restore parts support and data logging.
Ready when you are
Request service online in under a minute, or call. Our line is answered 24/7.
24/7 emergency service · Dispatch confirms every request by phone.