Skip to main content

Environmental & stability chambers · Repair & service

Environmental & Stability Chamber Repair & Service

Stability chambers hold a product at set temperature and humidity for weeks or months and have to prove it: a drug product through a stability study, a food product through its shelf life, a coated panel through an aging test. Environmental test chambers run a broader range with faster transitions for electronics, aerospace, and automotive testing. Both are refrigeration, heating, and humidity systems working against each other on purpose, and both need a technician who understands all three. We repair, maintain, map, and retrofit both.

  • Since 1977
  • Huntington Beach, CA
  • ISO 9001:2015 certified
  • Factory Authorized Service Center
  • NIST-traceable calibration
Illustration of stability chamber, Scientific Refrigeration blueprint style

Chamber out of range mid-study? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.

Stability chambers

A stability chamber holds steady conditions for weeks or months, more like a humidity-controlled incubator than a test chamber, and the study has to prove every hour of it. Pharmaceutical stability programs are the best-known use. The same chambers run food shelf-life studies, packaging and cosmetics aging, and materials conditioning, each to its own standard. We service reach-in and walk-in stability chambers, their humidity generation and water treatment, and the controllers and recorders the study data comes from.

  • Stability and photostability chambers

    Reach-in and walk-in chambers for long-term studies in any industry, including humidity generation and light banks.

  • Humidity systems

    Steam and atomizing humidifiers, water treatment, condensation management, and %RH sensors.

Environmental test chambers

An environmental test chamber works across a broader range with faster transitions: temperature, temperature-humidity, and altitude chambers used in electronics, aerospace, automotive, and materials testing. Corrosion testing on switches and components, paint-finish and material weathering, humidity exposure on assemblies: the refrigeration, heating, and humidity systems work against each other on purpose. Thermal cycling and thermal shock chambers are a separate category and are not covered on this page.

  • Temperature and temperature-humidity chambers

    Benchtop to walk-in test chambers from the TPS family and others, including the cascade refrigeration that reaches the low end.

  • Controllers and data

    Chamber controllers and recorders, from legacy units to modern touchscreens, including retrofits when a controller is obsolete.

What we’re called for

Humidity drifts because a water-treatment cartridge is spent or a sensor is fouled. Temperature overshoots because a refrigeration solenoid or a heater relay sticks. Uniformity falls apart when a circulation fan slows or the load blocks airflow. Compressors and condensers fail like any refrigeration system, only here the chamber may be mid-study when they do. A regular check of refrigeration, heating, humidity, and airflow keeps the study data defensible.

What a repair visit includes

  • Diagnosis on site

    Refrigeration, heating, humidity, and airflow are tested one at a time, because a humidity drift, an overshoot, and a uniformity failure each point at a different subsystem.

  • The repair

    Compressors and condensers, refrigeration solenoids and heater relays, humidifiers and water-treatment cartridges, %RH and temperature sensors, circulation fans, and controller retrofits when a controller is obsolete.

  • Verification before we leave

    Setpoint, humidity, and recovery verified, uniformity spot-checked, and the controller and recorder confirmed against a reference, with a mapping study scheduled where the repair affects qualification.

  • The record, and a straight answer

    A written record of what failed and what was done, and a plain repair-or-replace recommendation when a unit is past its useful life.

Response, rentals, and emergencies

A chamber mid-study comes first. We do not rent chambers; we schedule around your study calendar and keep a running chamber running while a repair is planned.

Operating ranges

Environmental chambers control temperature, and often humidity, for stability testing, shelf life studies, product validation, and materials testing. Operating ranges vary widely by manufacturer, model, and configuration. Below are published ranges from popular manufacturers.

  • Tenney Benchmaster benchtop chambers (Thermal Product Solutions)

    Temperature
    -68 to 180°C (-90 to 356°F)
    Humidity
    Humidity models 20% to 95% RH between 20 and 85°C (68 and 185°F)
  • Tenney TC Series reach-in chambers (Thermal Product Solutions)

    Temperature
    -68 to 180°C (-90 to 356°F) standard; extended range -73 to 200°C (-99 to 392°F)
    Humidity
    20% to 95% RH between 20 and 85°C
  • Tenney walk-in environmental rooms (Thermal Product Solutions)

    Temperature
    -68 to 85°C (-90 to 185°F)
    Humidity
    20% to 95% RH
  • Caron 7000 Series stability chambers

    Temperature
    5 to 70°C (41 to 158°F), with a 0°C (32°F) option
    Humidity
    20% to 95% RH, with a 2% RH option
  • Caron full product line

    Temperature
    -20 to 80°C (-4 to 176°F)
    Humidity
    2% to 98% RH

Humidity ranges are typically limited at low and high temperatures by the chamber’s dew point. Ranges shown are manufacturer-published figures and may vary by model and options. Need help keeping your chamber in spec? Call us.

A common example: pharmaceutical stability conditions

The ICH conditions below are popular reference points in pharmaceutical stability testing and show up on many chamber setpoints. They are one example, not a universal requirement. Food shelf-life, aerospace, automotive, and other programs test to their own standards. Check your own SOPs and the current guideline or standard for whatever you are testing to. We keep the chamber in spec; we do not set the conditions.

  • Long term

    Popular condition
    25°C / 60% RH or 30°C / 65% RH
  • Intermediate

    Popular condition
    30°C / 65% RH
  • Accelerated

    Popular condition
    40°C / 75% RH

Conditions shown are widely used examples. Confirm what your study requires against your own SOPs and the current applicable guidance before you set up a chamber.

Mapping and qualification

Stability chambers need temperature and humidity mapping at empty and loaded conditions, with the report to prove uniformity across the working space, whatever standard the study runs to. We perform IQ/OQ/PQ and periodic mapping with NIST-traceable instruments, and we can schedule it around your study calendar.

Brands

Environmental & stability chambers brands we see most

Linked brands have their own page. Not on the list? Ask. We service most makes and models.

Guides

Reading on environmental & stability chambers

Written by our technicians: what to check, what the numbers mean, and when to call.

Where

Where we service environmental & stability chambers

Ten Southern California counties from our Huntington Beach headquarters, and beyond by arrangement.

Los Angeles, Orange, Riverside, San Bernardino, San Diego, and Ventura counties are our core area. Santa Barbara, San Luis Obispo, Kern, and Imperial counties are on a regular route. Equipment that is already down jumps the queue, and our line is answered 24/7.

Outside Southern California we work by arrangement for contract and long-standing customers, and we say plainly what we can do and how soon.

Also from one team

  • Temperature Mapping

    Multi-point mapping studies that document real conditions across the entire chamber.

  • Calibration & Validation

    NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.

  • Service & Repair

    Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.

Environmental & stability chambers FAQs

Common questions

Can you map a stability chamber for a regulated study?

Yes. We map temperature and humidity across the working space with NIST-traceable sensors, empty and loaded, and deliver a report your quality system can file.

Our chamber's controller is obsolete. Do we have to replace the chamber?

Usually not. Many chambers accept a modern controller retrofit that restores parts availability and adds data logging, at a fraction of a new chamber.

Do you work on humidity systems, not just the refrigeration?

Yes. Humidifiers, water treatment, sensors, and the control logic between them are part of every chamber visit.

Tenney is a brand of Thermal Product Solutions, LLC. Caron is a trademark of Caron Products and Services, Inc. SciFrig is not affiliated with these companies.

Ready when you are

Environmental & stability chambers giving you trouble?

Request service online in under a minute, or call. Our line is answered 24/7.

24/7 emergency service · Dispatch confirms every request by phone.

Call nowRequest service

Request service

A few quick questions, then a dispatcher calls you to confirm.

What do you need?

Service type

Equipment failing right now? Don’t wait for a callback. 24/7 emergency service, and the line is answered 24/7.