Skip to main content

Thermal validation

Temperature mapping

The number on the display is one point. What matters is the temperature at every shelf and every corner, through every door-open cycle, because that’s where your product actually sits. Temperature mapping measures real conditions across the entire chamber using distributed sensors, so you can prove your storage environment, not assume it.

  • Since 1977
  • Huntington Beach, CA
  • ISO 9001:2015 certified
  • Factory Authorized Service Center
  • NIST-traceable calibration
Illustration of a mapping study: nine probes distributed through a chamber and the thermal profile they record, Scientific Refrigeration blueprint style

Equipment failing right now? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.

What mapping tells you

  • Hot and cold spots

    Where the chamber runs warmer or colder than the setpoint, so you know which shelves are safe for what.

  • Recovery behavior

    How fast the unit returns to spec after the door opens or after a power event.

  • Distribution under load

    Real conditions when the unit is full, not empty.

  • Documented proof

    A mapping report that stands up to audits and quality review.

When you need it

Qualifying new equipment, preparing for an audit, after a significant repair or relocation, or on a recurring schedule for units holding critical product. Mapping is often required for regulated storage: vaccines, pharmaceuticals, clinical samples, and stability studies.

Mapping as part of validation

Temperature mapping is a core part of OQ/PQ validation, but it’s also valuable on its own. We can run a standalone mapping study or fold it into a full IQ/OQ/PQ engagement, with NIST-traceable instruments either way.

Calibration, certification & validation

By equipment

Repair & service by equipment type

Every class of equipment fails in its own way. Pick yours for what we service, what goes wrong, and which brands we see most.

Temperature Mapping FAQs

Common questions

What is temperature mapping?

It’s the measurement of temperature across an entire chamber using multiple distributed sensors, documenting actual conditions at every location rather than the single point the display shows.

When is temperature mapping required?

Commonly when qualifying new equipment, preparing for audits, after major repairs or relocation, and for regulated storage of vaccines, pharmaceuticals, and clinical samples.

Are the instruments NIST-traceable?

Yes. Mapping uses NIST-traceable references, so results tie back to a recognized national standard.

Which equipment do you map?

ULT freezers, laboratory and pharmacy refrigerators and freezers, blood bank units, environmental and stability chambers, incubators, and walk-in cold rooms. Each equipment page describes the mapping that class usually needs.

Also from one team

  • Calibration & Validation

    NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.

  • Preventative Maintenance

    Scheduled upkeep on a cadence that fits each unit, so wear is found on a visit instead of as downtime.

  • Installation

    Professional setup, startup, and relocation, documented and ready for validation.

Ready when you are

Need to prove your storage environment?

24/7 emergency service · Dispatch confirms every request by phone.

Call nowRequest service

Request service

A few quick questions, then a dispatcher calls you to confirm.

What do you need?

Service type

Equipment failing right now? Don’t wait for a callback. 24/7 emergency service, and the line is answered 24/7.