Service & Repair
Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.
Freeze dryers · Repair & service
A freeze dryer is a refrigeration system with a vacuum pump attached: the condenser has to reach -50°C to -85°C and stay there while the vacuum pulls water off the product. When the condenser warms or the vacuum leaks, the run is lost. As a factory-authorized service center for Labconco, we service benchtop and console freeze dryers and their refrigeration.
Freeze dryer failing mid-run? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.
Single- and dual-compressor collectors from -50°C to -105°C, manifold and shelf configurations.
Compressors, condensers, refrigerant charge, and the collector coil that has to hold temperature under load.
Vacuum pumps, oil and filter service, valves, gaskets, and leak diagnosis on the chamber and manifold.
Controllers, sensors, and heated or refrigerated shelves on stoppering and tray dryers.
The collector no longer reaches temperature, which points to refrigeration: a weak compressor, low charge, or a condenser starved of airflow. Vacuum will not pull down, which points to a worn pump, contaminated oil, or a leak at a gasket or valve. Ice carries over into the pump because the collector was overloaded. Each has a different fix, and we test refrigeration and vacuum separately to find the real one.
Refrigeration and vacuum are tested separately: a collector that will not reach temperature points one way, a vacuum that will not pull down points the other.
Collector compressors and condensers, refrigerant charge, vacuum pumps and oil, valves and gaskets, controllers and sensors, and heated or refrigerated shelves.
Collector temperature and vacuum pull-down verified, leaks re-checked, and collector and shelf sensors calibrated.
A written record of what failed and what was done, and a plain repair-or-replace recommendation when a unit is past its useful life.
A freeze dryer that fails mid-run loses the run, so call as soon as the collector warms or the vacuum drops. We do not rent freeze dryers; for long repairs we advise on bridging options.
Routine service is a refrigeration check, a pump oil change and filter service, gasket inspection, and a calibration of the collector and shelf sensors. For long repairs we can advise on bridging options so your runs keep moving.
Brands
Linked brands have their own page. Not on the list? Ask. We service most makes and models.
Where
Ten Southern California counties from our Huntington Beach headquarters, and beyond by arrangement.
Los Angeles, Orange, Riverside, San Bernardino, San Diego, and Ventura counties are our core area. Santa Barbara, San Luis Obispo, Kern, and Imperial counties are on a regular route. Equipment that is already down jumps the queue, and our line is answered 24/7.
Outside Southern California we work by arrangement for contract and long-standing customers, and we say plainly what we can do and how soon.
Also from one team
Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.
Scheduled upkeep on a cadence that fits each unit, so wear is found on a visit instead of as downtime.
NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.
Freeze dryers FAQs
Yes. Pump oil and filter service, valve and gasket work, and leak diagnosis are part of a freeze dryer visit alongside the refrigeration.
Rarely. A collector that has lost its low end usually has a refrigeration fault we can repair: charge, compressor, or condenser airflow.
Ready when you are
Request service online in under a minute, or call. Our line is answered 24/7.
24/7 emergency service · Dispatch confirms every request by phone.