Skip to main content

Brands we service · Factory authorized

Lunaire service, repair, and calibration

Lunaire is the steady-state side of the Tenney/Lunaire pairing, aimed at pharmaceutical stability storage, shelf-life studies, and other long-duration temperature and humidity holds rather than rapid cycling. Its reach-in CEO chambers and walk-in WSS rooms are built around ICH Q1A storage conditions and continuous, low-drift control. The brand shares engineering and manufacturing with Tenney in New Columbia.

Lunaire unit failing right now? Call and dispatch triages it with you now. Or send an emergency request and a dispatcher calls you back.

Lunaire logo
Factory authorized
Headquarters
New Columbia, Pennsylvania, USA
Active manufacturer
Founded by Harold Lunick in Williamsport, Pennsylvania in 1979, merged with Tenney in 1992, and now a TPS brand whose lunaire.com domain redirects to tenney.com.
Lunaire official site (opens in a new tab)

Our relationship

Why Lunaire owners call us

Scientific Refrigeration is a factory-authorized service center for Lunaire. We service Lunaire equipment across Southern California and back that work with our own ISO 9001:2015 quality system.

Typical work on Lunaire equipment includes humidity-system descaling and rebuilds, refrigeration and condenser maintenance, sensor replacement and calibration, and temperature/humidity mapping to support ICH-compliant stability programs.

Equipment

Lunaire equipment we service

Stability test chambersSteady-state temperature/humidity chambersWalk-in stability roomsEnvironmental rooms

Product lines you’ll see in the field

  • CEO Stability Test Chambers
  • SS Steady State Chambers
  • WSS Walk-In Stability Rooms
  • Lunaire Environmental Rooms

Product names belong to Lunaire and are listed to help you identify your unit. If your model isn’t named here, ask. Model families change, and we service the ones in between.

What we see

Common service needs on Lunaire equipment

The calls we get most for this class of equipment, and what a good service visit looks like for each.

  • Long-run humidity drift

    Stability chambers run for months at a single condition. Excursions usually trace to gradual scale buildup in the vapor generator or an aging RH sensor, sometimes a clogged water line.

  • Condensing-unit wear

    Because the refrigeration system cycles continuously to hold 25 °C or 30 °C against heater load, compressors, fans and condenser coils see very high run hours and need regular cleaning and inspection.

  • Door gasket and panel seal leakage

    On walk-in rooms, worn door gaskets and panel joints let ambient air in, producing humidity gradients that show up in mapping studies.

  • Data and alarm integrity

    Regulated users depend on chart recorders, data loggers or network monitoring for audit trails, and a failed sensor or logger on a stability chamber can put a study at risk even if the chamber itself is holding condition.

Related brands

Part of the Thermal Product Solutions (TPS) family

Also from one team

  • Service & Repair

    Fast diagnosis and expert fixes, 24 hours a day, on virtually any make or model.

  • Preventative Maintenance

    Scheduled upkeep on a cadence that fits each unit, so wear is found on a visit instead of as downtime.

  • Calibration & Validation

    NIST-traceable calibration, IQ / OQ / PQ validation, and the certificates your auditors ask for.

  • Emergency 24/7

    Real around-the-clock response for the failures that can’t wait until morning.

  • Equipment Rental

    New and used rental units, including 24-hour emergency availability when a unit goes down.

  • Installation

    Professional setup, startup, and relocation, documented and ready for validation.

Questions, answered

Lunaire service questions

Does Lunaire still exist as a company?

Lunaire exists as a product brand of Thermal Product Solutions; its products are sold and supported through Tenney Environmental and its website redirects to tenney.com.

What conditions are Lunaire stability chambers built for?

They are built for the standard ICH long-term, intermediate and accelerated storage conditions such as 25 °C/60 % RH, 30 °C/65 % RH and 40 °C/75 % RH, plus custom setpoints.

Where do you service Lunaire equipment?

Across all ten Southern California counties we cover: from our Huntington Beach headquarters in Orange County through Los Angeles, San Diego, Riverside, San Bernardino, Ventura, Santa Barbara, San Luis Obispo, Kern, and Imperial counties. Emergency response is available 24/7 for equipment that is down.

Ready when you are

Have Lunaire equipment that needs attention?

Request service online in under a minute, or call. Our line is answered 24/7, and dispatch confirms every request by phone.

24/7 emergency service · Dispatch confirms every request by phone.

Call nowRequest service

Request service

A few quick questions, then a dispatcher calls you to confirm.

What do you need?

Service type

Equipment failing right now? Don’t wait for a callback. 24/7 emergency service, and the line is answered 24/7.