Tool
Sample Loss Cost Estimator
A freezer failure is expensive long before anyone calls for a repair. Enter what is stored and what it would cost to replace, and this estimator shows the value at risk, the warm-up window you are working with, and what that means for backup and rental decisions.
Read this first.
The figures on this page are industry averages, shown for example purposes. Your equipment, its age and condition, the room it sits in, and how it is used all change the real numbers, and units are often repurposed beyond their original design. Scientific Refrigeration accepts no liability for decisions made from these estimates. Do your own research for your application, follow your SOPs and the manufacturer’s manual, and keep a backup plan for stored product; that plan is your responsibility.
The warm-up windows below are averages for a full, closed unit in good condition. An older unit with tired insulation or a worn gasket can fail much faster.
What is stored
Freezers or refrigerators at risk.
Reagents, samples, product. Dollars.
From alarm to someone acting on it, nights and weekends included.
Results
Value at risk
—
Warm-up window
4–8 h
Window: 4 to 8 hours before a full ULT warms past -50°C.
Backup: Everything rides on the response time.
Within the window, if the alarm reaches someone and the unit is reading accurately. Keep calibration and alarm tests current.
Temporary cold storage is one way to cover a repair window. See equipment rental and the guide to writing an alarm response plan.
Industry averages for a full, closed unit in a normal room, shown for example purposes. Half-empty units, warm rooms, worn gaskets, and older insulation shorten them. Scientific Refrigeration accepts no liability for decisions based on these estimates; a backup plan for your product is your responsibility.
Go deeper
Guides on the same equipment
- 5 min read
Blood bank refrigeration: temperature, alarms, and records
What blood bank refrigerators, plasma freezers, and platelet incubators have to do that ordinary lab units do not, and the records an inspector expects to see.
- 5 min read
Calibration, validation, and mapping: what each one is and when you need it
Calibration, validation, and temperature mapping mean different things. What each one proves, and which one your auditor is actually asking for.
- 5 min read
What a cold-storage PM visit covers, task by task
The checklist behind a preventative maintenance visit on a lab refrigerator, freezer, or ULT freezer: each task, how often it is done, and which ones you can do in-house.
Ready when you are
Numbers say it is time to act?
Request service and a dispatcher will call to confirm. For a failure in progress, call now.
24/7 emergency service · Dispatch confirms every request by phone.